Tools Required - Sun Microsystems Enterprise 6500 Reference Manual

Caution – The chassis AC power cord must remain plugged in to ensure a proper
ground.
2.4

Tools Required

For the procedures in this book, you will need some or all of these tools:
Screwdriver, slotted, 3/16 inch
Screwdriver, Phillips #2
Screwdriver, Phillips #1
Hex driver, M-4
Hex driver, 3/16 inch
Hex driver, 9 mm
Wrench, 13 mm (supplied with the system)
DIP/IC extraction tool
ESD mat
Grounding wrist strap
Needlenose pliers
Hex driver, 3/32
Torque screwdriver (supplied with the system), preset to 6 inch-pounds
2-4 Sun Enterprise 6500/5500/4500 Systems Reference Manual • April 1998