Rack Mounting Procedure - Extron electronics SSP 7.1 User Manual

Rack mounting procedure

The unit can be mounted in the front or rear of:
• RSU 126 (6"deep, 1U rack shelf kit: part #
• RSB 126 (6" deep, 1U basic rack shelf: part #
• RSU 129 (9.5" deep, 1U rack shelf kit: part #
• RSB 129 (9.5" deep, 1U basic rack shelf: part #
To mount the unit, follow these instructions:
1. Remove rubber feet if these have been installed on the bottom of the unit.
2. Align the unit on the shelf and secure it to the shelf with two 4-40 x 3/16" screws
in diagonally opposite corners (see the figure below).
3. Install false faceplate(s) or other unit(s) to the rack shelf.
4. Attach the shelf to the rack with the four provided 10-32 x 3/4" bolts.
1U Universal Rack Shelf
Front false
faceplate
uses 2
screws.
Installing the SSP 7.1 on shelf rack
60-190-10)
60-604-10)
60-190-01)
1/2 Rack Width Front False
Faceplate
Use 2 mounting holes on
opposite corners.
60-604-01)
(2) 4-40 x 3/16"
Screws
SSP 7.1 • Mounting 2-3