Output Trim; Input/Output Information Bar - Extron electronics SSP 7.1 User Manual

SSP 7.1 Setup and Control Software, cont'd

Output Trim

The Output Trim sliders control the level of individual audio signals for
each channel output. Only channels that are available in the current speaker
configuration are available; the others are grayed out. Output trim is adjustable
between -24 dB and +12 dB. The current value for each output channel is shown in
the text box.
Send test signals, generated as described above, to each individual speaker. Adjust
the output trim for each speaker as follows:
1. Grab and drag the slider bar to adjust output trim in 1 dB increments.
2. Click on the output trim control to bring it into focus and then use the up and
3. With the output trim control in focus, use the up and down keys on the
4. Alternatively, with the output trim control in focus, use the page up and page
The Reset button returns the Output Trim values for all speakers to the default
value (0 dB).

Input/Output information bar

The Input/Output Status bar is available from all GUI tabs and is described in
detail on page 5-5.
5-14 5-14 SSP 7.1 • Setup and Control Software
down arrows beside the text box to adjust it in 1 dB increments.
keyboard to adjust it in 1 dB increments.
down keys on the keyboard to adjust it in 5 dB increments.