Table of Contents
Advertisement
Mounting
This section outlines the various options for mounting the TLSI 101.
•
•
•
•
Wall Mounting
The TLSI 201 can be discretely mounted to the wall behind a flat panel display. See the
TLSI 201 product page at
instructions included with the kit.
Rack Mounting
Underwriters Laboratories Guidelines for Rack Mounting
The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation
of these products in a rack:
Elevated operating ambient temperature — If the unit is installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, install the equipment in an
environment compatible with the maximum ambient temperature (Tma: +122 °F, +45 °C)
specified by Extron.
Reduced air flow — Install the equipment in the rack so that the equipment gets
adequate air flow for safe operation.
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
Circuit overloading — Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Give appropriate consideration to the equipment nameplate ratings when addressing this
concern.
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct connections
to the branch circuit (such as the use of power strips).
Rack Mounting the TLSI 201
The TLSI 201 can be mounted on any standard rack system (not provided). See
www.extron.com
the kit.
Wall Mounting
Rack Mounting
Tabletop Placement
Under-desk Mounting
www.extron.com
for a list of appropriate kits and follow the instructions included with
for suitable mouting kits and follow the
TLSI 201 • Mounting
21
Advertisement
Table of Contents
