Extron electronics SSP 7.1 User Manual page 68

Configuration and Control, cont'd
X3%
X3^
X3&
X3*
X3(
X4)
X4!
X4@
6-6 6-6 SSP 7.1 • Configuration and Control
— Dolby Pro Logic II/IIx Music Panorama
0 = Off (default)
1 = On
— Mono Output
1 = Center only (default)
2 = Front Left and Right only
— Dynamic Range Compression
0 = None (default)
1 = MIN
2 = MAX
— Mode Override Group
0 = No Mode Override (no LEDs on)
1 = Multichannel Downmix (DOWNMIX)
2 = Dolby Pro Logic II/IIx (
3 = DTS Neo:6 (DTS NEO:6)
4 = To All (TO ALL)
— Mute Status
Eight digit representation with each position in the sequence representing a
speaker. The speakers are listed in the same order as in
0 = unmuted
1 = muted
For example, Mut 00100001 means the right front speaker and subwoofer are
muted and all other speakers are unmuted.
— Active Channel Status
Eight digit representation with each position in the sequence representing a
speaker. The speakers are listed in the same order as in
0 = no audio signal present on channel
1 = channel receiving audio signal
2 = channel receiving audio signal, but muted
For example, ActCh 11122001 means the first (left front), second (center), third
(right front), and eighth (subwoofer) channels are receiving an audio signal; the
fourth (left surround side) and fifth (right surround side) are receiving a signal
but it is muted; the sixth (left surround back) and seventh (right surround back)
are not receiving a signal.
— Mode Override Group Listening Mode Options
1 = Stereo (DOWNMIX)
2 = Mono (DOWNMIX)
3 = Dolby Pro Logic II/IIx Movie (
4 = Dolby Pro Logic II/IIx Music (
5 = DTS Neo:6 Cinema (DTS NEO:6)
6 = DTS Neo:6 Music (DTS NEO:6)
7 = Stereo to All (TO ALL)
8 = Mono to All (TO ALL)
— Baud rate (bps)
0 = 9600 (default)
1 = 19200
PL II/IIx)
X@
X@
PL II/IIx)
PL II/IIx)
.
.