Mounting; Mounting Options; Ul Rack Mounting Guidelines - Extron electronics IP Link Pro xi IPL EXP PDU4H User Manual

Control system power expansion interface
Hide thumbs Also See for IP Link Pro xi IPL EXP PDU4H:
Table of Contents

Advertisement

Mounting

Mounting Options

Optional 1U rack shelves and a variety of rack mounting bracket kits and furniture mounting
kits are available for use with the IPL EXP PDU4H. The unit can be mounted to the following
items:
Visit the product‑specific page at
for mounting your control processor or call a support representative to find out which kit to
order for your installation.
Read the instructions that are included with the rack shelf or mounting kit for installation
procedures and see the UL rack mounting guidelines below for safe installation. Then
securely mount the IPL EXP PDU4H and other devices, and attach cables using the wiring
section (see
wiring guide.

UL Rack Mounting Guidelines

The following
IPL EXP PDU4H in a rack.
CAUTION:
tabletop
optional equipment rack shelf
Cabling, Addressing, Features, and Connections
Underwriters Laboratories (UL)
• Elevated operating ambient temperature — If installed in a closed or multi‑
unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, install the EXP in an
environment compatible with the maximum ambient temperature
(Tma = +122°F, +50°C) specified by Extron.
• Reduced air flow — Install the equipment in a rack so that the amount of air flow
required for safe operation of the equipment is not compromised.
• Mechanical loading — Mount the equipment in the rack so that a hazardous
condition is not achieved due to uneven mechanical loading.
• Circuit overloading — Connect the equipment to the supply circuit and consider
the effect that circuit overloading might have on overcurrent protection and supply
wiring. Appropriate consideration of equipment nameplate ratings should be used
when addressing this concern.
• Reliable earthing (grounding) — Maintain reliable grounding of rack‑mounted
equipment. Pay particular attention to supply connections other than direct
connections to the branch circuit (such as use of power strips).
equipment rack rails
furniture
www.extron.com
for a list of compatible accessories
guidelines pertain to the safe installation of
IPL EXP PDU4H • Hardware Features and Installation
on page 14) as a
12

Advertisement

Table of Contents
loading

Table of Contents