Dts + Dolby Pro Logic Iix Movie Or Music; Dts 96/24 + Dolby Pro Logic Iix Movie Or Music; Dts + Dolby Ex; Dts 96/24 + Dolby Ex - Extron electronics SSP 7.1 User Manual

DTS + Dolby Pro Logic IIx Movie or Music

This mode uses Dolby Pro Logic IIx matrix mixing effects to create up to two
additional surround back channel effects from the original 5.1 information of a
DTS Digital Surround or DTS-ES Matrix 6.1 source format. Both the Movie and
Music modes produce up to seven full bandwidth matrixed channels.
N This listening mode is only available when the SSP 7.1 is set up for 6.0 to 7.1
channel outputs and a DTS Digital Surround source format is present.

DTS 96/24 + Dolby Pro Logic IIx Movie or Music

This mode is similar to DTS + Dolby Pro Logic IIx Movie or Music (see above), but
is intended for use with DTS 96/24 source formats.

DTS + Dolby EX

This mode uses Dolby Digital EX matrix mixing surround effects to create an
additional surround center back channel from the discrete 5.1 information of a
DTS Digital Surround source format to create up to 6.1 channel effects.
N This listening mode is only available when the SSP 7.1 is set up for 6.1 to 7.1
channel outputs and a DTS Digital Surround source format is present.

DTS 96/24 + Dolby EX

This mode is similar to DTS + Dolby EX (see above), but is intended for use with
DTS 96/24 source formats.

DTS Neo:6 Cinema or Music

This mode produces up to seven separate full-bandwidth matrix channels from a
2-channel (stereo) audio input.
DTS Neo:6 Cinema assigns the in-phase component of the signal to the center
channels and the reversed phase component to the surround (left, right and center
or left/right back) channels.
In the DTS Neo:6 Music mode, the left and right front channels bypass the decoder
and are played directly, with no loss of sound quality. The surround signal outputs
from the center, right side, left side (for 5.1), the center (for 6.1), or left and right
back (for 7.1) channels. In the DTS Neo:6 Music mode, there is one adjustable
control:

Center Image Control

The Center Image control varies the amount of attenuation applied to the Left and
Right channel information of the input source that is used for creating the output
Center channel effects. When it is set to 0, the mixed input signal information,
intended for use in creating the Center output channel of the DTS Neo:6 listening
modes, is filtered back to the Front Left and Right output channels. This creates
the effect of spreading the centralized audio signal across all three front output
channels. When this control is set to 10, the matrixed information intended for the
front left and front right output channel effects is fully attenuated, allowing the
Center channel to dominate and creating a more centralized effect from the front
channels.
SSP 7.1 • Reference Material B-9