Extron electronics SSP 7.1 User Manual page 76

Configuration and Control, cont'd
Command
Source Format Flag Detection
View if DTS 96/24 encoded
in DTS source
Test Signal Noise
Turn Test Signal Off
Turn Dolby Noise Test
Signal On
Turn Pink Noise Test Signal
On
View Test Signal Status
Information Request
Query firmware version
Query firmware version
and build number
Request part number
Request general
information
Request model name
System Reset
Master Reset
Factory Reset
Firmware Upload
Upload firmware
Status Commands
View internal temperature
(°C)
View Clip Status
X!
— Input (1-5): 1 and 2 = Digital audio, optical input; 3 and 4 = Digital audio, coaxial input; 5 = Analog input
X^
— Volume Adjustment (0 - 100, default = 50 dB; corresponding to attenuation of -100 to 0 dB in 1 dB steps).
Max volume (no attenuation) = 0 dB; Min volume (full attenuation) = -100 dB
X1@
— Listening Mode (Matrix Decode Mode indicator on the front panel): 1 = Stereo; 2 = Mono; 3 = Stereo to All; 4 = Mono to All;
5 = Dolby Pro Logic; 6 = Dolby Pro Logic II/IIx Movie; 7 = Dolby Pro Logic II/IIx Music; 8 = Dolby Digital 5.1; 9 = Dolby Digital EX;
10 = Dolby Digital Pro Logic IIx Movie; 11 = Dolby Digital Pro Logic IIx Music; 12 = DTS or DTS 96/24;
13 = DTS ES Matrix or DTS 96/24 ES Matrix; 14 = DTS ES Discrete; 15 = DTS + Dolby EX or DTS 96/24 + Dolby EX;
16 = DTS + Dolby Pro Logic IIx Movie or DTS 96/24 + Dolby Pro Logic IIx Movie;
17 = DTS + Dolby Pro Logic IIx Music or DTS 96/24 + Dolby Pro Logic IIx Music; 18 = DTS Neo:6 Cinema; 19 = DTS Neo:6 Music
6-14 6-14 SSP 7.1 • Configuration and Control
ASCII Command Response
(host to unit) (unit to host)
34I
DTS9624•
E }
X0TSTA TstaX
E }
X1TSTA TstaX
E }
X2TSTA TstaX
E }
XTSTA TstaX
Q
Ver
*Q
Ver
N Pno60-842-01
I or 0I
Aud
•
1I
SSP 7.1
E }
zXXX Zpx
E }
zQQQ Zpq
E }
UPLOAD Go
Upl
20S
Sts20*
3S
Sts3*
X#]
X3$]
X3$]
X3$]
X3$]
X2!]
X2@]
X!• X1@
LMod
X^• X#]
Vol Mut
]
]
]
]
]
X1$]
X#]
Additional description
Status of DTS 96/24 encoded in DTS
source
X#
— Status: 0 = Off (default); 1 = On
X3$
— Sets the Test Signal Noise Source:
0 = Off (default);
1 = Dolby;
2 = Pink
Displays current Test Signal Noise
Source
X2!
— Version (x.xx)
X2@
— version and build number
(x.xx.xxxx)
SSP 7.1 part number: 60-842-01
Displays the audio input number (
X1@
Listening Mode ( ), Volume (
X#
Mute Status ( )
Model name is SSP 7.1
Resets all parameters to factory defaults
Same as Master Reset but also resets
baud rate.
Upload begins
Upload successful
X1$
— Internal temperature in °C
Displays Clip Status:
X#
— Status: 0 = Off (default); 1 = On
X!
),
X^
), and