Extron electronics SSP 7.1 User Manual page 65

X!
— Audio Inputs (1-5)
0 = Disconnect all inputs
1 and 2 = Digital audio, optical input
3 and 4 = Digital audio, coaxial input
5 = Analog input
X@
— Audio Outputs (1-8)
1 = Left Front
2 = Center
3 = Right Front
4 = Left Surround Side
5 = Right Surround Side
6 = Left Surround Back
7 = Right Surround Back
8 = Subwoofer
X#
— Status
0 = Off
1 = On
X$
— Volume Output Mode
0 = Fixed (volume no attenuation)
1 = Variable (default)
X%
— Bass and treble adjustment range in dB -10 to +10 dB in 1 dB increments
(default 0 dB)
X^
— Volume Adjustment (0 - 100, default = 50 dB; corresponding to attenuation of
-100 to 0 dB in 1 dB steps).
Max volume (no attenuation) = 0 dB; Min volume (full attenuation) = -100 dB
X&
— Furthest speaker distance (in units of 0.01 seconds; default = 0)
N Furthest speaker distance is included for reference only; it is used only with the
SSP 7.1 Setup and Control Software (see chapter 5).
X(
— Input gain and attenuation readout (0 to +24 dB in 1 dB steps; default 0 dB)
X1)
— Mono source
1 = Left
2 = Right
3 = Left + Right (default)
SSP 7.1 • Configuration and Control 6-3 6-3