Extron electronics SSP 7.1 User Manual page 75

Command
Mode Override Selection
Set Mode Override
View Mode Override for
each input
Listening Mode Preference for each Mode Override Group
Set Listening Mode
Preference for each Mode
Override Group
View Listening Mode
Preference for each Mode
Override Group
Mono Source Setting (for Analog input #5 only)
Set Mono Source to Left
Channel
Set Mono Source to Right
Channel
Set Mono Source to Left +
Right Channel
View current Mono Source
Analog Input Gain Adjustment (for Analog Input #5 only)
Set Analog Input Gain
Level
View Analog Input Gain
Level
Speaker Configuration Information Request
View channel Outputs
Activity
Source Format Information Request
View channel Outputs
Activity
X2%
— Source Format Sampling Frequency: 0 = None; 1 = 32 kHz; 2 = 44.1 kHz; 3 = 48 kHz; 4 = 88.2 kHz; 5 = 96 kHz
X2^
— Source Format Encoded Channels: 0 = None; 1 = 1/0; 2 = 1/0.1; 3 = 2/0; 4 = 2/0.1; 5 = 2/1; 6 = 2/1.1; 7 = 2/2; 8 = 2/2.1;
9 = 3/0; 10 = 3/0.1; 11 = 3/1; 12 = 3/1.1; 13 = 3/2; 14 = 3/2.1; 15 = 3/3; 16 = 3/3.1
X3*
— Mode Override Group: 0 = No Mode Override (no LEDs on); 1 = Multichannel Downmix (DOWNMIX);
2 = Dolby Pro Logic II/IIx (
X4)
is an eight digit representation with each position in the sequence representing a speaker. The speakers are listed in the same order as in
0 = no audio signal present on channel; 1 = channel receiving audio signal; 2 = channel receiving audio signal, but muted
For example, ActCh 11122001 means the first (left front), second (center), third (right front), and eighth (subwoofer) channels are receiving an
audio signal; the fourth (left surround side) and fifth (right surround side) are receiving a signal but it is muted; the sixth (left surround back)
and seventh (right surround back) are not receiving a signal.
X4!
— Mode Override Group Listening Mode Options: 1 = Stereo (DOWNMIX); 2 = Mono (DOWNMIX);
3 = Dolby Pro Logic II/IIx Movie (
6 = DTS Neo:6 Music (DTS NEO:6); 7 = Stereo to All (TO ALL); 8 = Mono to All (TO ALL)
ASCII Command
(host to unit)
E X! X2$ X3* }
Q * * SSP
E X! X2$ }
Q * SSP
E X! X3* X4! }
U * * SSP
E X! X3* }
U * SSP
E }
N1SSP
E }
N2SSP
E }
N3SSP
E }
NSSP
E X( }
A SSP
E }
ASSP
32I
33I
PL II/IIx); 3 = DTS Neo:6 (DTS NEO:6); 4 = To All (TO ALL)
PL II/IIx); 4 = Dolby Pro Logic II/IIx Music (
Response
(unit to host)
X! X2$ X3*]
SspQ * *
X! X2$ X3*]
SspQ * *
X! X3* X4!]
SspU * *
X! X3* X4!]
SspU * *
X1)]
SspN
X1)]
SspN
X1)]
SspN
X1)]
SspN
X(]
SspA
X(]
SspA
X4)]
ActCh
X2$•
SrcFormat
X2%•
Sampling
X2^]
EnChan
PL II/IIx); 5 = DTS Neo:6 Cinema (DTS NEO:6);
SSP 7.1 • Configuration and Control
Additional description
Sets the Mode Override
Displays the current Mono Output
status
Sets the Listening Mode Preference for
each Mode Override Group
Displays the current Listening Mode
Preference for each Mode Override
Group
Sets Mono Source
X1)
— Mono source
1 = Left (default)
2 = Right
3 = Left + Right
Displays the current Mono Source
Setting
Sets the Analog Input Gain Level
X(
— Input gain
0 to +24 dB in 1 dB steps (default = 0)
Displays the current Analog Input Gain
X2$
Displays the Source Format (
Source Format sampling frequency
X2%
( ), and Source Format Encoded
X2^
Channels ( )
6-13 6-13
),
X@
.