Extron electronics SSP 7.1 User Manual page 105

F
Factory Default Settings 5-18
See
Factory Reset. System Reset
See
File. Drop down menus
Firmware build number 6-14
Firmware updates 5-23
Firmware version 6-14
See
Fixed control. Volume Output Control
Front Panel Features 3-2
Front Panel Operations 3-6
Front Panel Security Lockout 3-10, 5-17, 6-11
H
See
Help. Drop down menus
I
Included Parts A-4
Input selection 3-2, 3-8, 5-3, 5-6, 6-8
Input Source Format Indicator 3-2
Installing the SSP 7.1 Windows Control Program 5-2
L
LED Bar 3-3
Listening mode 4-6, 5-12, 6-13
Options B-6
Output channels B-13
Source formats 5-16, B-15
Usage B-10
Listening Mode B-6
Listening Mode and Output Channels B-13
Listening Modes Usage B-10
See
Listening Mode Tab. SSP 7.1 Setup and Control
Software
M
See
Main Tab. SSP 7.1 Setup and Control Software
See
Master Reset. System Reset
Master Volume 5-6
See
Menu. Drop down menus
Mode override 1-3, 3-2, 3-6, 5-16, 6-13
Mono Listening Mode B-6, B-10, B-13
Mono output 5-18, 6-12
Mono source 5-18
Mono source settings 5-18
Mono to all B-6, B-10, B-13
Mounting 2-2
Rack Mounting 2-2
Rack mounting procedure 2-3
Tabletop placement 2-2
UL guidelines for rack mounting 2-2
Under-desk mounting 2-4
Mute 3-8, 5-6, 6-8
O
Optional Accessories A-4
Output Channels 5-6
Viewing with SSP 7.1 Windows Control Program 5-6
Output channel trim 4-6, 6-10
P
Panorama control 4-7, 5-19, 6-11
Panorama Control B-8
Part number 6-14, A-4
See
Pink noise. Test signal
Pulse code modulation (PCM) 3-6, B-5, B-15
R
See
Rack Mounting. Mounting
See
Real Time Analyzer. Compensation delay setup with
Real Time Analyzer
Rear Panel Features 3-4
RS-232 Port 3-2, 3-5
Running the SSP 7.1 Windows Control Program 5-2
S
Sampling Frequency B-5
Setting up test sources with SIS commands 6-17
Setup and Control Software.
See
Setup Tab. SSP 7.1 Setup and Control Software
Simple Instruction Set commands 3-2, 3-5, 6-2
ASCII to hex conversion table.
Conversion Table
Command/response table for SIS commands 6-8
See
SIS. Simple Instruction Set commands
See
SIS commands. Simple Instruction Set commands
Source Format 3-6, 5-5, B-3
Viewing with SSP 7.1 Windows Control Program 5-5
Source Formats and Listening Modes with Different
Speaker Setups B-15
See
Speaker Configuration Tab.
Control Software
Speaker delay settings 4-5, 5-9
See
Speaker Delay Tab. SSP 7.1 Setup and Control
Software
Speaker setup 4-2, 6-13
Speaker size 4-4, 5-7, 5-8, 6-8, 6-9
Specifications
Audio A-2
Audio Input - Analog A-2
Audio Input - Digital A-2
Audio output A-2
Control/remote - audio processor A-3
General A-3
SSP 7.1 Setup and Control Software 1-2, 5-2
Advanced Tab 5-17
Communications dialog box 5-2
SSP 7.1 • Index and Glossary
See
See
ASCII to HEX
SSP 7.1 Setup and
C-3