Extron electronics SSP 7.1 User Manual page 67

X2$
— Source Format (Source LED on front panel)
0 = Not Present
1 = Analog (2-CH)
2 = PCM (PCM and 2-CH)
3 = Dolby Digital 5.1 (
4 = Dolby Digital 2/0 (when 2/0 encoding flag is detected) (
5 = Dolby Digital 2/0 Surround (when 2/0 matrix encoding is detected) (
and 2-CH)
6 = Dolby Digital Surround EX (when EX encoding flag is detected) (
7 = DTS Digital Surround or DTS 96/24 (DTS)
8 = DTS-ES Matrix 6.1 or DTS 96/24 ES Matrix 6.1 (When ES Matrix encoding
flag is detected) (DTS)
9 = DTS-ES Discrete 6.1 (When ES Discrete encoding flag is detected) (DTS)
10 = DTS 2-Channel (DTS and 2-CH)
X2%
— Source Format Sampling Frequency
0 = None
1 = 32 kHz
2 = 44.1 kHz
3 = 48 kHz
4 = 88.2 kHz
5 = 96 kHz
X2^
— Source Format Encoded Channels
0 = None 9 = 3/0
1 = 1/0 10 = 3/0.1
2 = 1/0 .1 11 = 3/1
3 = 2/0 12 = 3/1.1
4 = 2/0.1 13 = 3/2
5 = 2/1 14 = 3/2.1
6 = 2/1.1 15 = 3/3
7 = 2/2 16 = 3/3.1
8 = 2/2.1
X2&
— Dolby Pro Logic II/IIx Music Dimension Control
0 = Neutral (default)
1 = Front
2 = Back
X3!
— Speaker Groups
1 = Left and Right Front
2 = Center
3 = Left and Right Surround Side
X3@
— Surround Back Speaker Size Front
0 = None (default)
1 = 1 small speaker
2 = 2 small speakers
3 = 1 large speaker
4 = 2 large speakers
X3#
— Output Channel Trim adjustment range in dB (-24 to +12 dB in 1 dB steps;
default 0 dB)
X3$
— Noise Test Source
0 = None (default)
1 = Dolby
2 = Pink noise
D)
SSP 7.1 • Configuration and Control
D and 2-CH)
D
D)
6-5 6-5