Recalling A Preset - Extron electronics ISM 824 User Manual

Press the Esc button to
clear all selections.
C O N T R O L
ENTER PRESET VIEW ESC
The Esc button flashes
green once.
The input and output buttons light red.
Step 3.
Press and release the desired input or
output button.
INPUTS
1 2 3 4 5
1 2 3 4 5
OUTPUTS
The Selected button blinks red.
Figure 3-28 — Steps 3 and 4 for saving a preset
4.

Recalling a preset

To recall a preset do the following:
1.
2.
N If no buttons are pressed for 30 seconds after step 2, the Preset mode times out,
Step 1.
Press the Esc button to
clear all selections.
ENTER
Figure 3-29 — Steps 1 and 2 for recalling a preset
3.
N Input buttons have preset addresses 1 through 8, output buttons have preset
4.
ISM 824 Integration Scaling Multiswitcher • Operation and Setup
Press and hold the Preset
button. The button flashes
C O N T R O L
ENTER PRESET VIEW ESC
ENTER
6 7 8
The Enter and Preset buttons flash red.
The LCD shows the selected preset
number.
6 7 8
Press the Enter button. All lights extinguish and the preset (the current
configuration) is saved.
Press the Esc button to clear all pending changes and reset the LCD.
Press and release the Preset button. The Preset button lights red, and input
and output buttons with previously saved presets light red. The LCD panel
shows the preset recall mode (see figure 3-29).
and all buttons extinguish.
Step 2.
Press and release the Preset
button. The button lights red.
C O N T R O L C O N T R O L
PRESET VIEW ESC ENTER PRESET
The Esc button
flashes green once.
The input and output buttons with saved
presets assigned light red.
Press and release the desired saved preset button (input or output) to recall.
The selected button and the Enter button flash red. The LCD shows the
selected preset number (see figure 3-30).
addresses 9 through 16.
Press the Enter button. All lights extinguish (except Video and Audio) and the
preset is recalled and becomes the current configuration.
S
ave
P #00
reset
The LCD shows the Preset save mode.
0
C O N T R O L
PRESET VIEW ESC
S
ave
P #11
reset
VIEW ESC
N The LCD shows the Preset
recall mode.
Step 4.
Press and release the
Enter button to save the preset.
C O N T R O L
ENTER PRESET VIEW ESC
All lights extinguish and the
LCD resets.
R
ecall
P #00
reset
3-21