Adjusting The Picture Detail - Extron electronics ISM 824 User Manual

Operation and Setup, cont'd
Step 1. Step 2.
Press the Esc button to
Press the Bright/Cont button.
clear all selections.
The button lights green.
C O N T R O L
ENTER PRESET VIEW ESC
The Esc button flashes
green once.
N The LCD shows the current Bright/Cont setting.
Figure 3-34 — Steps 1 and 2 for adjusting brightness and contrast
3.
N Brightness and contrast adjustments are not available for scan converter cards.
4.

Adjusting the picture detail

To adjust the picture detail do the following:
1.
2.
N All applicable outputs light or flash green. To change to a different output, press
Step 1. Step 2.
Press the Esc button to
Press the Detail button. The button lights
clear all selections.
green.
C O N T R O L
ENTER PRESET VIEW ESC
The Esc button flashes
green once.
N The LCD shows the current detail setting.
Figure 3-35 — Steps 1 and 2 for adjusting detail
3.
N For Universal Scaler cards, detail range is 0 to 255, default is 128, and for Video
4.
3-24 ISM 824 Integration Scaling Multiswitcher • Operation and Setup
COLOR/
BRIGHT/
DETAIL POSITION SIZE
TINT
CONT
PICTURE ADJUSTMENTS
Brt Out #5 Cont
128 128
Using the left front panel encoder (
default is 128), and with the right (
default is 128).
Press the Esc button to clear all button and reset the LCD.
Press the Esc button to clear all pending changes and reset the LCD.
Press and release the detail adjustment button. The output buttons for scaler
/scan converter cards (outputs 3 through 8) and any associated (tied) input
buttons light solid green. Untied outputs flash green. The LCD panel shows
the current detail setting (see figure 3-35) for that lit output.
the desired output button. The selected button will light green
BRIGHT/
COLOR/
DETAIL SIZE
POSITION
TINT CONT
PICTURE ADJUSTMENTS
Out #5 Detail
128
Using either of the front panel encoders (
Scaler cards, detail range is 0 to 63, default is 16.
Press the Esc button to clear all button and reset the LCD.
2
1
3
ZOOM
2
1
3
The scaler output card button (#5) and associated input
(#2) light green. Non tied scaler outputs (#8) flash green.
[
adjust the brightness (0 to 255,
),
{
) encoder, adjust the contrast (0 to 255,
1 2 3
ZOOM
1 2 3
The scaler output card button (#5) and associated input
(#2) light green. Non tied inputs (#8) flash green.
[ {
), adjust the detail.
or
INPUTS
6 7
4 5 8
4 6 7 8
5
OUTPUTS
INPUTS
4 5 6 7 8
4 5 6 7 8
OUTPUTS