Input Configuration Menu - Extron electronics ISM 824 User Manual

Operation and Setup, cont'd
Con guration
Other Menus
Figure 3-42 — Auto image menu
2.
3.
N When an output is selected that output button remains steady green, and other
4.
5.

Input configuration menu

This is the second menu level, and is reached by pressing the Menu button twice, or
pressing the button a number of times until the Input Configuration menu is shown
on the LCD screen.
This menu allows the user to define the signal format for any individual input. The
signal formats available are RGB (the default), YUV-HD, YUVp, YUVi, S-video, and
composite. The input signal may be processed or passed unprocessed depending
on the output selected for that input.
To configure and input signal format, do the following:
1.
2.
Figure 3-43 — Input configuration menu
3-30 ISM 824 Integration Scaling Multiswitcher • Operation and Setup
Default
Cy cle
Menu
30 sec . Next
Menu
Auto
Next
Image
Next
Menu
Input
Rotate either encoder to scr oll
through outputs #3 through #8,
or press the desired button.
Menu
NOTE
Press the Next button to enter the sub level.
Rotate either encoder to select the desired output, or press the desired output
button.
available output buttons continue to flash green.
Press Next to exit the sub level. Auto image is applied to that selected output.
Press the Menu button or wait for 30 seconds to return to default cycle
From the default cycle, press the Menu button twice to select the input
configuration menu (see figure 3-43)
Press the Next button to enter the sub level.
NOTE
Default
Cycle
Menu
30 sec.
Auto
Image
Menu
Next
Input
Configuration
Menu
Output Card
Configuration
Menu
Other
Menu levels
30 sec .
Auto Image Auto Image
Output # 5
<N/A>
Next
The output buttons for cards
that have auto image
availability flash green.
When the sub menu is selected, all input buttons flash green.
Select an input by pressing its button. The button lights steady
green, and the LCD indicates the selected input. Other non
selected inputs continue to flash green.
30 sec.
Input #4
S-video
Inputs #1 through #8
Next
Rotate either encoder to
select a signal format -
RGB, YUV-HD, YUVp,
YUVi, S-Video, Composite
Menu
30 sec .
30 sec .
Auto Image
Output # 5
Next