Using The Software - Extron electronics ISM 824 User Manual

ISM 824 Multiswitcher Software, cont'd

Using the software

The items found in the ISM 824 Control Program are also accessible via front panel
controls
(see chapter 4, "SIS
provides information on settings and on how to use the control program itself.
Use the software as follow:
1.
Figure 5-4 — Connection type selection windows
2.
3.
N If the local system administrators have not changed the value, the factory-
N If the local system administrators have not changed the Tenet Port value, then 23
N If you logged on using the administrator password, the Windows program
5-4 ISM 824 Integration Scaling Multiswitcher • ISM 824 Multiswitcher Software
(see chapter 3, "Operation and
™ Programming and
To run the ISM 824 Control Program, either double click the desktop
icon (if installed) or select Start > Programs > Extron Electronics
>ISM 824 > ISM 824.
One of two Connect Type selection windows appears (see figure 5-4).
If the preferred window is not showing, click the other tab to make it
available:
• TCP/IP tab (used for connection via the LAN port — proceed to step 3),
or
• RS-232 tab (used for connection via the rear panel RS-232/422 port or
front panel Configuration port — proceed to step 4).
If connecting by TCP/IP:
a. Observe the Extron IP Address and Telnet Port fields in the IP Connection
window. The field displays the last Extron IP address and Telnet Port
entered.
If the IP Address and Telnet fields are correct, proceed to step 3b.
If the address is not correct, click in the IP Address field and enter the
IP address.
specified default, 192.168.254.254, is the correct value for this field
If the Telnet Port is not correct, click in the Telnet field and enter the
Telnet Port number. Proceed to step 3b.
is the correct value for this field.
b. If the switcher is password protected, click in the Password field and
enter the appropriate administrator or user password.
c. Click Connect.
connects you to the ISM 824 multiswitcher with all of the administrator rights
and privileges.
Setup") and under SIS control
™
Control"). The ISM 824 Help Program
or