Picture Adjustments; Overview - Extron electronics ISM 824 User Manual

Operation and Setup, cont'd
Step 3.
Press and release the desired input or
output button (preset) to recall.
1
1
Step 4.
Press and release the
Enter button to recall the preset.
ENTER
All lights extinguish and the LCD resets.
Figure 3-30 — Steps 3 and 4 for recalling a preset

Picture adjustments

Overview

The ISM 824 has six buttons for picture adjustment modes. These modes are color/
tint, brightness/contrast, detail, position, size, and zoom adjustments.
COLOR/
F igure 3-31 — Picture adjustment buttons
N Picture adjustments can only be made on input/output ties for Universal Scaler,
Adjustments can be made from the front panel, RS-232/RS-422, or via Ethernet
connection.
See chapter 4, "SIS
chapter 5, "ISM 824 Multiswitcher
Ethernet commands.
The following table shows which adjustments can be made to specific input signal type
and output card combinations.
Picture
Adjustments
Color/Tint
Brightness/
Contrast
Detail
Position
Size
Zoom
Figure 3-32 — Picture adjustment table
3-22 ISM 824 Integration Scaling Multiswitcher • Operation and Setup
The selected button flashes red.
INPUTS
2 3 4 5 6
2 3 4 5 6
OUTPUTS
C O N T R O L
PRESET VIEW ESC
BRIGHT/
DETAIL POSITION SIZE
TINT CONT
PICTURE ADJUSTMENTS
Video Scaler, and Scan Converter output cards. All pass thorough and wide
band outputs do not require any picture adjustment control.
Programming and Control",
™
Universal Scaler
Vid, YC
(Tint on NTSC only)
All inputs
All inputs
All inputs
All inputs
All inputs
C O N T R O L
ENTER PRESET
7 8
The Enter button flashes red.
The LCD shows the selected preset number
to recall.
7 8
P
reset
ZOOM
for RS-232/RS-422 commands,
Software", and chapter 6, "HTML Operation"
Video Scaler
Vid, YC
(Tint on NTSC only)
Vid, YC, YUVi
Vid, YC, YUVi
Vid, YC, YUVi
Vid, YC, YUVi
Vid, YC, YUVi
VIEW ESC
R
ecall
#07
for
Wideband
Outputs
N/A
N/A
N/A
N/A
N/A
N/A