Multi-Step Speeds Parameters - Delta Electronics AC Motor Drive VFD-E User Manual

Chapter 4 Parameters|
Group 5: Multi-step Speeds Parameters
05.00 1st Step Speed Frequency
05.01 2nd Step Speed Frequency
05.02 3rd Step Speed Frequency
05.03 4th Step Speed Frequency
05.04 5th Step Speed Frequency
05.05 6th Step Speed Frequency
05.06 7th Step Speed Frequency
05.07 8th Step Speed Frequency
05.08 9th Step Speed Frequency
05.09 10th Step Speed Frequency
05.10 11th Step Speed Frequency
05.11 12th Step Speed Frequency
05.12 13th Step Speed Frequency
05.13 14th Step Speed Frequency
05.14 15th Step Speed Frequency
Settings
The Multi-function Input Terminals (refer to Pr.04.05 to 04.08) are used to select one of the AC
motor drive Multi-step speeds. The speeds (frequencies) are determined by Pr.05.00 to 05.14
as shown in the following.
4-88
0.00 to 600.0Hz
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Factory Setting: 0.00