Move - Delta Electronics AC Motor Drive VFD-E User Manual

3. To clear the comparison result, use RST or ZRST instruction.
X0
API Mnemonic
12 MOV
Type Bit Devices
OP
X Y
S
D
Operands:
S: Source of data D: Destination of data
Explanations:
1. See the specifications of each model for their range of use.
2. When this instruction is executed, the content of S will be moved directly to D. When this
instruction is not executed, the content of D remains unchanged.
Program Example:
MOV instruction has to be adopted in the moving of 16-bit data.
1. When X0 = Off, the content in D10 will remain unchanged. If X0 = On, the value K10 will
be moved to D10 data register.
2. When X1 = Off, the content in D10 will remain unchanged. If X1 = On, the present value
T0 will be moved to D10 data register.
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
X0 X0
ZCP
M0
M1
M2
RST
M0
M1
RST
RST
M2
Operands
P S, D
Word devices
M K H KnX KnY KnM T
* * *
Appendix D How to Use PLC Function|
K10 K100
If C10 < K10, M0 = On
If K10 < C10 < K100, M1 = On
= =
If C10 > K100, M2 = On
X0
ZRST
C
* * * *
* * * *
C10 M0
M0 M2
Function

Move

Program Steps
D MOV, MOVP: 5 steps
*
*
D-49