The Analog Output Used By Plc (Not For Vfd*E*C Models) - Delta Electronics AC Motor Drive VFD-E User Manual

Chapter 4 Parameters|
For example: when Pr.03.09 is set to 3 (decimal) = 00000011 (binary) that indicates Relay1
and MO1 are used by PLC. (Pr.03.09= 2
03.10

The Analog Output Used by PLC (NOT for VFD*E*C models)

Settings
The equivalent 1-bit is used to display the status (used or not used) of each analog output. The
value that Pr.03.10 displays is the result after converting 1-bit binary into decimal value.
For Example:
If Pr.03.10 displays 1, it means that AFM is used by PLC.
4-66
Weights
Bit 7 6 5
Weights
Bit 0 0 0
Read Only
Bit0=1: AFM used by PLC
Bit1=1: AO1 used by PLC
Bit2=1: AO2 used by PLC
Weights
Bit
2
0=not used
1=Used by PLC
4 3 2 1 0
0 1
+2 =3)
0=not used
1=Used by PLC
0 0 0 1 1
0=not used
1=Used by PLC
1 0
AFM
AO1 (optional)
AO2 (optional)
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
Relay 1
MO1
MO2/RA2
MO3/RA3
MO4/RA4
MO5/RA5
MO6/RA6
MO7/RA7
Relay 1
MO1
MO2/RA2
MO3/RA3
MO4/RA4
MO5/RA5
MO6/RA6
MO7/RA7
Factory setting: ##