Delta Electronics AC Motor Drive VFD-E User Manual page 256

Display Message
NOTE
When the setting exceeds 99.99 for those numbers with 2 decimals (i.e. unit is 0.01), it will only
display 1 decimal due to 4-digital display.
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
Displays the actual stored value of the selected parameter.
External Fault.
Display "End" for approximately 1 second if input has been accepted by
pressing key. After a parameter value has been set, the new value
is automatically stored in memory. To modify an entry, use the
keys.
Display "Err", if the input is invalid.
Appendix B Accessories|
Descriptions
and
B-19