D.4.11 Function Code (Only For Plc2 Mode); D.5 Commands; D.5.1 Basic Commands - Delta Electronics AC Motor Drive VFD-E User Manual

Appendix D How to Use PLC Function|
NOTE: when it is in PLC1 mode, the communication address will correspond to the parameter NOT
the device. For example, address 0400H will correspond to Pr.04.00 NOT X0.

D.4.11 Function Code (only for PLC2 mode)

Function Code
01
02
03
05
06
0F
10

D.5 Commands

D.5.1 Basic Commands

Commands
LD
LDI
AND
ANI
OR
ORI
ANB
ORB
MPS
MRD
MPP
INV
D-28
Description
Read coil status
Read input status
Read one data
Force changing one coil status
Write in one data
Force changing multiple coil status
Write in multiple data
Function
Load contact A
Load contact B
Series connection with A contact
Series connection with B contact
Parallel connection with A contact
Parallel connection with B contact
Series connects the circuit block
Parallel connects the circuit block
Save the operation result
Read the operation result (the pointer not moving)
Read the result
Inverter the result
Supported Devices
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
Y, M, T, C
X, Y, M, T, C
T, C, D
Y, M, T, C
T, C, D
Y, M, T, C
T, C, D
Operands
X, Y, M, T, C
X, Y, M, T, C
X, Y, M, T, C
X, Y, M, T, C
X, Y, M, T, C
X, Y, M, T, C
--
--
--
--
--
--