Delta Electronics AC Motor Drive VFD-E User Manual page 61

Chapter 4 Parameters|
Parameter Explanation
Loss of ACI Signal
02.06
(4-20mA)
02.07 Up/Down Mode
Accel/Decel Rate of
Change of
02.08 UP/DOWN
Operation with
Constant Speed
Source of Second
02.09 Frequency
Command
Combination of the
First and Second
02.10
Master Frequency
Command
Keypad Frequency
02.11
Command
Communication
02.12 Frequency
Command
4-8
Settings
2: Disable. Operation status will change if
operation command source Pr.02.01 is
changed.
3: Enable. Operation status will change if
operation command source Pr.02.01 is
changed.
0: Decelerate to 0 Hz
1: Coast to stop and display "AErr"
2: Continue operation by last frequency
command
0: by UP/DOWN Key
1: Based on accel/decel time
2: Constant speed (Pr.02.08)
3: Pulse input unit (Pr.02.08)
0.01~10.00 Hz
0: Digital keypad UP/DOWN keys or Multi-
function Inputs UP/DOWN. Last used
frequency saved.
1: 0 to +10V from AVI
2: 4 to 20mA from ACI or 0 to +10V from
AVI2
3: RS-485 (RJ-45)/USB communication
4: Digital keypad potentiometer
5: CANopen communication
0: First Master Frequency Command
1: First Master Frequency Command+
Second Master Frequency Command
2: First Master Frequency Command -
Second Master Frequency Command
0.00 to 600.0Hz
0.00 to 600.0Hz
Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
Factory
Customer
Setting
1
0
0.01
0
0
60.00
60.00