Torque Mode +Speed Limit; Torque Mode-Speed Limit; Source Of Torque Offset - Delta Electronics AC Motor Drive VFD-VE Series User Manual

Chapter 4 Parameters|
torque
07-25
07-26
Pr.07-24=0
Running/opposite running
direction are
limited by Pr.07-25
and Pr.07-26.
07-25

Torque Mode +Speed Limit

07-26

Torque Mode-Speed Limit

Control
TQRPG
mode
Settings
These parameters are used in the torque mode to limit the running direction and opposite
direction. (Pr.01-00 max. output frequency=100%)
07-27

Source of Torque Offset

Control
SVC FOCPG TQRPG
mode
Settings
This parameter is the source of torque offset.
When it is set to 3, the source of torque offset will decide to Pr.07-29, Pr.07-30 and Pr.07-31
by the multi-function input terminals setting (31, 32 or 33).
02-01~02-06 is set to 31 02-01~02-06 is set to 32 02-01~02-06 is set to 33
OFF
OFF
OFF
OFF
ON
ON
ON
ON
4-116
torque
frequency
07-26
07-24=1
When it is forward running,
running direction is limited
by Pr.00-20
opposite running direction
is limited by Pr.07-26.
0 to 120%
0 Disable
1 Analog input (Pr.03-00)
2 Torque offset setting
3 Control by external terminal (by Pr.07-29 to Pr.07-31)
OFF
OFF
ON
ON
OFF
OFF
ON
ON
frequency
00-20 00-20
07-24=1
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Revision August 2008, 03VE, SW V2.04
torque
frequency
07-25
When it is reverse running,
running direction is limited
by Pr.07-25
opposite running direction
is limited by Pr.00-20.
Factory Setting: 10
Factory Setting: 0
Torque offset
None
07-33
07-32
07-33+07-32
07-31
07-31+07-33
07-31+07-32
07-31+07-32+07-33
Unit: 1
Unit: 1