Pulse Frequency - Delta Electronics AC Motor Drive VFD-VE Series User Manual

Chapter 4 Parameters|
Settings Functions

Pulse frequency

19
command
03-19 Analog Output Gain 1
03-22 Analog Output Gain 2 (need to be used with EMV-APP01)
03-25 Analog Output Gain 3 (need to be used with EMV-APP01)
Control
VF VFPG
mode
Settings
It is used to adjust the analog voltage level that terminal AFM outputs.
This parameter is set the corresponding voltage of the analog output 0.
03-20 Analog Output Value in REV Direction 1
03-23 Analog Output Value in REV Direction 2
03-26 Analog Output Value in REV Direction 3
Control
VF VFPG
mode
Settings
03-20=0
03-23=0
03-26=0
4-84
Max. frequency Pr.01-00 is regarded as 100%.
SVC FOCPG TQRPG
0 to 200.0%
SVC FOCPG TQRPG
0 Absolute value in REV direction
1 Output 0V in REV direction
2 Enable output voltage in REV direction
10V( 20mA)
03-18
03-21
0V
03-24
( 0mA)
Selections for the analog output dir ec ti on
Descriptions
10V( 20mA)
F requenc y
0V
( 0mA)
03-20=1
03-23=1
03-26=1
Revision August 2008, 03VE, SW V2.04
Unit: 0.1
Unit: 0.1
Unit: 0.1
Factory setting: 100.0
Factory setting: 0
10V( 20mA)
F requenc y
5V
( 12mA)
03-20=2
03-23=2
03-26=2