Installation; General Precaution; B.9 Amd-Emi Filter Cross Reference - Delta Electronics AC Motor Drive VFD-VE Series User Manual

B.9 AMD-EMI Filter Cross Reference

VFD007V43A-2, VFD015V43A-2, VFD022V43A-2
VFD037V43A-2
VFD055V43A-2, VFD075V43A-2, VFD110V43A-2,
VFD110V43B-2
VFD007V23A-2, VFD015V23A-2
VFD022V23A-2, VFD037V23A-2
VFD055V23A-2, VFD075V23A-2, VFD150V43A-2,
VFD185V43A-2
VFD110V23A-2, VFD150V23A-2, VFD220V43A-2,
VFD300V43A-2, VFD370V43A-2
VFD550V43A-2, VFD750V43A-2, VFD550V43C-2,
VFD750V43C-2
VFD185V23A-2, VFD220V23A-2, VFD300V23A-2,
VFD450V43A-2
VFD370V23A-2

Installation

All electrical equipment, including AC motor drives, will generate high-frequency/low-frequency noise
and will interfere with peripheral equipment by radiation or conduction when in operation. By using an
EMI filter with correct installation, much interference can be eliminated. It is recommended to use
DELTA EMI filter to have the best interference elimination performance.
We assure that it can comply with following rules when AC motor drive and EMI filter are installed
and wired according to user manual:
EN61000-6-4
EN61800-3: 1996 + A11: 2000
EN55011 (1991) Class A Group 1 (1

General precaution

1. EMI filter and AC motor drive should be installed on the same metal plate.
2. Please install AC motor drive on footprint EMI filter or install EMI filter as close as possible to
the AC motor drive.
3. Please wire as short as possible.
4. Metal plate should be grounded.
Revision August 2008, 03VE, SW V2.04
AC Drives
st
Environment, restricted distribution)
Appendix B Accessories|
Model Number
RF022B43AA
RF037B43BA
RF110B43CA
10TDT1W4C
26TDT1W4C
50TDS4W4C
100TDS84C
200TDDS84C
150TDS84C
180TDS84C
FootPrint
Y
Y
Y
N
N
N
N
N
N
N
B-29