Coil Number For Each Layer; Material Thickness; Filter Time Of Reel Diameter; Auto Compensation Of Reel Diameter - Delta Electronics AC Motor Drive VFD-VE Series User Manual

Chapter 4 Parameters|
Control
VF VFPG
mode
Settings
08-50

Coil Number for Each Layer

Control
VF VFPG
mode
Settings
08-51

Material Thickness

Control
VF VFPG
mode
Settings
08-52

Filter Time of Reel Diameter

Control
VF VFPG
mode
Settings
This parameter can be used to improve unstable of the source of reel diameter(Pr.08-42).
08-53

Auto Compensation of Reel Diameter

Control
VF VFPG
mode
Settings
08-54 Current Reel Diameter
Control
VF VFPG
mode
Settings
When the AC motor drive is not at STOP, this parameter is read-only.
08-55 Smart Start
Control
VF VFPG
mode
Settings
08-56 Switch Level for Smart Start and PID Function
Control
VF VFPG
mode
4-132
SVC FOCPG TQRPG
1 to 10000ppr
SVC FOCPG TQRPG
1 to 10000
SVC FOCPG TQRPG
0.001 to 60.000mm
SVC FOCPG TQRPG
0.00 to 100.00 sec
SVC FOCPG TQRPG
0 Disable
1 Enable
SVC FOCPG TQRPG
1.0 to 6000.0 mm
SVC FOCPG TQRPG
0 Disable
1 Enable
2 In unwind mode, rewind in reverse direction
SVC FOCPG TQRPG
Factory Setting: 1
Factory Setting: 1
Factory Setting: 1.000
Factory Setting: 1.00
Factory Setting: 0
Factory Setting: 1.0
Factory Setting: 0
Factory Setting: 15.0
Revision August 2008, 03VE, SW V2.04
Unit: 1
Unit: 0.001
Unit: 0.01
Unit: 0.1
Unit: 1