Range For Pg Position Attained (Home Range); P Gain Of Zero Speed; I Gain Of Zero Speed; Feed Forward Gain Of Apr - Delta Electronics AC Motor Drive VFD-VE Series User Manual

Range for PG Position Attained (Home range)

10-20
Control
VFPG FOCPG
mode
Settings
This parameter determines the Home position attained in the position control mode.
10-21

P Gain of Zero Speed

Control
VFPG FOCPG
mode
Settings
10-22

I Gain of Zero Speed

Control
VFPG FOCPG
mode
Settings
This parameter determines zero speed command gain in speed control.
10-23

Feed Forward Gain of APR

Control
VFPG FOCPG
mode
Settings
10-24 Decelerate Time of Position
Control
VFPG FOCPG
mode
Settings
10-25 Max. Frequency for Resolution Switch
Control
VF VFPG
mode
Settings
This function is used to enhance the function of unstable speed/position due to insufficient
resolution of analog simulation value. It needs to use with external input terminals (one of
Pr.02-01 to Pr.02-06/Pr.02-23 to Pr.02-30 should be set to 43).
Revision August 2008, 03VE, SW V2.04
0 to 20000
0 to 40Hz
0.000 to 10.000 sec
0 to 100
0.00 to 600.00 sec/0.0 to 6000.0 sec
SVC FOCPG TQRPG
50.00 to 600.00Hz
Chapter 4 Parameters|
Factory Setting: 10
Factory Setting: 10
Factory Setting: 0.100
Factory Setting: 30
Unit: 0.01/0.1
Factory Setting: 3.00/3.0
Factory Setting: 50.00
Unit: 1
Unit: 1
Unit: 0.001
Unit: 1
Unit: 0.01
4-155