Table of Contents
Advertisement
Step 4
1. Enter either the scanner (line
adapter) number or the address of a
line attached to the scanner at A .
2. Type SX or SY and press
(where X equals the scanner
number, and Y equals the line
address).
The IML begins when the following
message displays:
IML FOR SCANNER xx IN PROGRESS.
If the message INVALID INPUT displays,
restart this step.
If the following message displays:
SCANNER CANNOT BE IMLED: MOSS IS NOT
ONLINE, set the MOSS online by
performing step 2.
If any other messages display, contact
the person in charge of 3745 problem
analysis (see page 1-5).
Step 5
Wait approximately one minute. If the
IML is successful, the following message
displays:
IML FOR SCANNER xx COMPLETED:
SCANNER IS CONNECTED. →
Step 6
Press
to end the procedure.
MOSS IML from the 3745 Control Panel
If you have a problem with this step, see the online Problem Analysis Guide.
COMM CTRL ID:xxxxxxxx
3745-XXX
CCU-A
PROCESS MOSS-ONLINE
RUN
CCU-B
PROCESS MOSS-OFFLINE
RUN
────────────────────────────────────────────────────── mm/dd/yy hh:mm
FUNCTION ON SCREEN: IML ONE SCANNER
- ENTER:
THE SCANNER NUMBER PRECEDED BY S (S1 TO S32)
OR
THE LINE ADDRESS (000 TO 1071)
(0 TO 895 FOR TSS
)
(1024 TO 1039 FOR HPTSS)
(1056 TO 1071 FOR ESS )
===>
IML FOR SCANNER xx IN PROGRESS
F1:END F2:MENU2 F3:ALARM
─────────────────────────────────────────────────────────────────────────
COMM CTRL ID:xxxxxxxx
3745-XXX
CCU-A
PROCESS MOSS-ONLINE
RUN
CCU-B
PROCESS MOSS-OFFLINE
RUN
────────────────────────────────────────────────────── mm/dd/yy hh:mm
FUNCTION ON SCREEN: IML ONE SCANNER
- ENTER:
THE SCANNER NUMBER PRECEDED BY S (S1 TO S32)
OR
THE LINE ADDRESS (000 TO 1071)
(0 TO 895 FOR TSS
)
(1024 TO 1039 FOR HPTSS)
(1056 TO 1071 FOR ESS )
===>
IML FOR SCANNER xx COMPLETED: SCANNER IS CONNECTED
F1:END F2:MENU2 F3:ALARM
─────────────────────────────────────────────────────────────────────────
Appendix B. Basic Service Procedures
SERIAL NUMBER:nnnnnnn
==> A
SERIAL NUMBER:nnnnnnn
==>
B-3
Advertisement
Table of Contents
