Table of Contents
Advertisement
Parameter Values that Must Be the Same
Table 11-1 gives the sets of MOSS-E parameters that must have the same value
in both the remote workstation and the target service processor.
The configuration procedure in this chapter explains how to find these parameters
in the remote workstation.
Configuring the Service Processor in MOSS-E
The following procedure explains how to find, record, and configure the service
processor parameters:
Step
Step
Step
11-2
3746-950: User's Guide
Table 11-1. Identical Target and Controlling Parameters (SNA)
Service Processor
Local Node Network ID
(Figure 11-2 on page 11-3)
SDLC LU name
(Figure 11-3 on page 11-4)
TIC2 or TIC3 LAA
(Figure 11-2 on page 11-3)
TIC3 RSAP
(Figure 11-2 on page 11-3)
1. In MOSS-E, double-click the Service Processor object.
2. Click Configuration Management.
3. Double-click SP Customization.
Remote Workstation
Partner network ID
(step 9 on page 11-7)
and
Network ID
(step 10 on page 11-8)
Partner node name
(step 9 on page 11-7)
and
LU name
(step 10 on page 11-8)
and
Partner LU alias
(step 7 on page 11-11)
LAN Destination address
(step 9 on page 11-7)
Remote SAP
(step 9 on page 11-7)
Advertisement
Table of Contents
