Changing Passwords On The 3745 Moss - IBM 3745 Series Connection And Integration Manual

Step 30
§]
If you are integrating hardware or line parameter changes, continue with
the next step.
Otherwise, you have finished this procedure, do no more Steps.
Continue with other integration procedures.
Note: You must at least do "Saving MOSS from Fixed Disk onto
Diskettes" on page 5-19 when you have finished all other integration
procedures.
Changing Passwords on the 3745 MOSS
If you have a 3745 Model A -~------------------..
Do not use this procedure.
Refer to "Initial Installation" on page 5-1
This procedure covers the following MOSS password functions:
1. Update management password
2. Update local console password
3. Update remote console password
4. Update maintenance password
5. Display passwords.
For information on the remaining password functions see the Advanced Operations
Guide, SA33-0097. These other functions are:
• Temporary activation of maintenance password
• Permanent activation of maintenance password
• Deactivation of maintenance password
• Display/reset/update log on attempt counters
• Update customer identification
• Update time out for remote console disconnection.
Note: IBM3745 is the default password for all the 3745s.
When
PASSWORD
appears in the text of the procedure, enter the appropriate
current password at the consote.
Step 1
00G
(Enter)
Step 2
Type in your management password and press
I
Enter)
(Or the default management password at first time )
5-14
3745 All Models & 3746-900: CIG
CD 0 8 CD CD
8]
CD
(Enter)
IMPORTANT--------------------------------------------~
Record and safeguard your management password. Loss of this
password requires the help of your IBM service representative and is
time-consuming. Then, any data not saved on your backup
diskettes will be lost in the process.
o
C :
i . )
. J