IBM 3746 Installation Instructions Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Controller
  5. 3746
  6. Installation instructions manual
IBM 3746 Installation Instructions Manual

IBM 3746 Installation Instructions Manual

64 mb memory upgrade (fc 3520) on the system card of the multiaccess enclosure (fc 3000)
Hide thumbs Also See for 3746:

Advertisement

Table of Contents

IBML
Installation Instructions
on the System Card of the Multiaccess Enclosure (FC 3000)
3746
PN 25L9934
EC F12604
FFBM
1 of 10
14/04/1998
© Copyright IBM Corp. 1998
Field Feature Bill of Material
PN 25L9934
64 Mb Memory Upgrade (FC 3520)
of the IBM 3746 Models 9X0
Written by:
Checked by:
Approved by:
Reviewed by:
C. Vallee
J. Dauverd
A. Badino
B. Kelly
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3746 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IBM 3746

Summary of Contents for IBM 3746

  • Page 1 Installation Instructions Field Feature Bill of Material PN 25L9934 64 Mb Memory Upgrade (FC 3520) on the System Card of the Multiaccess Enclosure (FC 3000) of the IBM 3746 Models 9X0 Written by: C. Vallee Checked by: J. Dauverd Approved by: A.
  • Page 2 IBML Installation Instructions 3746 PN 25L9934 EC F12604 FFBM 2 of 10 14/04/1998...
  • Page 3 Installation Instructions Before Installation (Steps 1-8) 1.0 Machines Affected 3746 Model 9X0 with Multiaccess Enclosure (FC 3000) and MAE Extended Func- tions (FC 5804). This feature should only be applied on the machine serial for which it is speci- fied .

  • Page 4: Purpose And Description

    To increase the performance by adding a 64 Mb Dual Inline Memory Module (DIMM) on the system card on the Multiaccess Enclosure. 7.0 Installation Time FFBM Machine System Hrs. CE Hour Nbr of CE Hrs. 25L9934 00.0 00.0 8.0 Tools/Material Required None. 3746 PN 25L9934 EC F12604 FFBM 4 of 10 14/04/1998...
  • Page 5 9.0 Safety Review the Safety Notices and the Safety Inspection Procedures located at the beginning of the IBM 3745 Communication Controller All Models , IBM 3746 Expansion Unit Model 900 , IBM 3746 Nways Multiprotocol Controller Model 950 Safety Information , GA33-0400.
  • Page 6 With the card in full contact with the rear of the Multiaccess Enclo- sure, press the locking latches into the system card. 2. Tighten the thumbscrews on the face of the adapter card clockwise. 3746 PN 25L9934 EC F12604...
  • Page 7 3. re-plug the cables into the system card. 4. Power ON; Then verify the LEDs (Refer to Figure 1 and to page 8 for LEDs status meaning). Figure 1. Power Supply, System Card, and Adapter Card LEDs 3746 PN 25L9934 EC F12604 FFBM...
  • Page 8 Use the Maintenance Analysis Procedures (MAPs) to isolate. Off - No problem detected. Note: The port LEDs of the multiport WAN adapters (FC 3282, FC 3291, and FC 3292) reflect the status of one or more of the ports. 3746 PN 25L9934 EC F12604 FFBM...

  • Page 9: Test Procedures

    IBML Installation Instructions 11.0 Test Procedures No test required. 12.0 Field Updating None. 3746 PN 25L9934 EC F12604 FFBM 9 of 10 14/04/1998...
  • Page 10 After Installation (steps 13-15) 13.0 Publications Update None. 14.0 Parts Disposition None. 15.0 Machine Records • Install the new MACHINE HISTORY supplied. • Report installation and quality to existing procedures. End of instructions. 3746 PN 25L9934 EC F12604 FFBM 10 of 10 14/04/1998...

This manual is also suitable for:

9x0

Table of Contents