Table of Contents
Advertisement
Step
8. Enter the port number in the Port name field, the number of your modem
in the Local phone number field, click OK and Close.
Step
9. Select SNA Phone Connect - Connection Manager and click
Configure.
Step 10. Select SP123456 and click Change.
Note: The directory entry file contains information on the target service
processor that you are dialing. You can use SP123456 and
rename it for your own purposes. If you add a new workstation,
you must create a new name.
Chapter 9. Using DCAF with a Modem-Attached Remote Workstation
9-7
Advertisement
Table of Contents
