Table of Contents
Advertisement
Step
7. Fill in the Local LU alias, Partner LU alias, and Mode name fields
respectively with CTRL1, ERS1SNA, DCAFMODE, and click Save.
Step
8. Repeat step 6 and step 7 by entering the following in the Workstation
name and Partner LU alias fields:
a. ERS1SDLC, then click Save.
b. ERS1LAN, then click Save.
c. BS12SNA, then click Save.
d. BS12SDLC, then click Save.
e. BS12LAN, then click Save.
Step
9. Click Cancel to finish.
Step 10. Run the EQNSFPAR program to verify link records.
Appendix D. Configuration for a Two-Target Remote Workstation
D-5
Advertisement
Table of Contents
