Table of Contents
Advertisement
Customizing a CS/2 Remote Workstation
For the different types of workstation connections, see the following:
Configuring Data Link Control (DLC) for a Service Processor
The following is a list of recommended CM/2 and CS/2 parameters for a remote
workstation, enabling it to correspond with the DLC definitions of the service
processor. Although they are a guide to help you with selecting parameters, you
must supply the actual values that correspond to your network.
Create or Change the Token-Ring Network DLC Adapter Profile
The parameters for this panel apply to LAN- (APPC-type), SNA-, and APPN- (via a
LAN) attached consoles.
Adapter number
Load DLC
Maximum number of link stations
Percent of incoming calls
Free unused link
Congestion tolerance
Maximum RU size
Send Window Count
Receive Window Count
C&SM LAN ID
Send alert for beaconing
Create or Change the SDLC DLC Adapter Profile
The parameters for this panel apply to modem- and SNA- (SDLC) attached
consoles.
Adapter number
Load DLC
Free unused link
Maximum RU size
Send Window Count
Receive Window Count
Line type
7-2
3746-950: User's Guide
Modem-attached, see Chapter 9, "Using DCAF with a Modem-Attached
Remote Workstation."
APPN-attached, see Chapter 10, "Using DCAF with an APPN-Attached
Remote Workstation."
SNA-attached, see Chapter 11, "Using DCAF with an SNA-Attached Remote
Workstation."
APPC LAN-attached, see Chapter 13, "Using DCAF with an APPC
LAN-Attached Remote Workstation."
0
Yes
4
50
No
80
2024
4
4
(Customer defined)
Yes
0
Yes
No
4096
4
4
Switched
Advertisement
Table of Contents
