IBM 950 User Manual page 120

Step 18. Select To peer node, the service processor link name and click Change
Step 19. Check that the entries in the Partner network ID and Partner node
Step 20. Close the subsequent panels until you exit CS/2.
Step 21. See "Configuring DCAF for a Modem" on page 9-21 for installing a target
9-20
3746-950: User's Guide
and Continue.
name fields match the entries in the MOSS-E (see Table 9-1 on
page 9-1). Select the service processor directory name in the Outgoing
call directory entry field and click OK.
service processor.