Remote Workstation Access Via Switched Line (Modem); Configuring The Remote Workstation In Windows 95; Modem-Attached Remote Workstation Using Java Console - IBM 950 User Manual

Remote Workstation Access Via Switched Line (Modem)

Remote Workstation
PPP Client
Figure 16-1. Modem-Attached Remote Workstation Using Java Console
This section contains the following example procedures for two different remote
workstation platforms:

Configuring the Remote Workstation in Windows 95

It is assumed that the TCP/IP network component and workstation modem is
correctly installed and configured.
Step
Step
16-2
3746-950: User's Guide
Modem
Public Switched
Network
NNPA
In "Configuring the Remote Workstation in Windows 95."
In "Configuring the Remote Workstation in OS/2 Warp" on page 16-8.
1. Click My Computer and double-click the Dial-Up Networking folder.
2. Double-click Make New Connection. Enter a name for the configuration,
check that your modem is displayed, then click Configure.
Modem
Service Processor
PPP Server
Service
LAN