Select an object and click the right mouse button to display a pull-down menu.
From a pull-down menu, you can do the following:
MOSS-E Passwords
When logging on to the MOSS-E through the MOSS-E View panel, choose the
password that corresponds to the mode and functions that you want to use.
There are four password modes for secure access to customer and maintenance
functions of MOSS-E menus.
Controller customer password
Controller maintenance password
Service processor customer password
Service processor maintenance password
Note: Use 5 to 8 alphanumeric characters for passwords. Each mode must have
3-2
3746-950: User's Guide
Open a machine menu
Close a machine menu
Display the status of a machine (this does not apply to the service processor)
Clear alarm bells
Access to operator functions in the 3746 and 3745 menus. For first
level operators.
Access to operator and maintenance functions in the 3746 and 3745
menus. For IBM Service personnel.
Access to operator functions in the service processor and controllers.
For supervisors and system programmers.
Access to functions in the service processor and controllers. Take care
in distributing this password because IBM requires it for service
procedures.
a password unique from passwords in the other modes.