Step
5. Record the values in the Network ID field (see Figure 9-2 and see
Table 9-1 on page 9-1) and click Next and Next again.
Figure 9-2. NetView Link/Reporting Customization
Step
6. Record the value in the SDLC LU name field.
Figure 9-3. DCAF Customization
Step
7. Set Accept any incoming calls on SP? to Yes.
Step
8. Enter the Local phone number, click Next, click Close and Yes to save
the configuration.
Step
9. Shutdown and restart the service processor.
Step 10. Go to "Remote Workstation Modems" on page 9-4.
Chapter 9. Using DCAF with a Modem-Attached Remote Workstation
9-3