2. Power ON the Service Processor.
3. Check your display. The IBM logo appears, and the power-on self-test (POST)
4. Wait while the message MOSS-E is being loaded, please wait is displayed.
5. When the following panel appears, enter the Service Processor maintenance
6. Press Enter or click OK, then go to step 10 on page 1-35 if nothing has been
Figure 1-29. MOSS-E View Primary Panel
1-34
3745-XXA 1-34 3746-9X0: 6578 SPIM
begins. F1 and Esc prompts appear and then disappear.
password (default is IBM3745).
customized on your Service Processor, or go to step 7 on page 1-35 to select
the Service Processor customization function.