Step
6. Fill in the Workstation name field (seeLocal LU name in step 14 on
page 13-10), select APPC, Target, and click Protocol.
Step
7. Fill in the Local LU alias field (see Local LU name in step 14 on
page 13-10), and Partner LU alias field (seeTable 13-1 on page 13-2).
Enter DCAFMODE in the Mode name field.
Step
8. Click Save and Cancel. The new workstation icon appears in the DCAF
Directory panel.
Step
9. Shutdown and restart the workstation.
Chapter 13. Using DCAF with an APPC LAN-Attached Remote Workstation
13-11