Step
OS/2 Warp
Step
Step
Running the Java Console Program in Windows
For a connection between the remote workstation and the service processor across
a PPP switched line, initiate the modem connection first (see "Initiating a PPP
Switched Line Connection in Windows 95" on page 16-7 for Windows, and
"Initiating a Switched Line Connection in OS/2 Warp" on page 16-10 for OS/2).
Then continue with the procedure below.
To use the Java Console program for a connection between the remote workstation
and the service processor across a LAN, continue with the following procedure.
Step
Step
17-4
3746-950: User's Guide
2. Save and close the new batch file.
1. Create a command file (.CMD) and enter the following:
@echo OFF
java Java2You.Start %1
where %1 represents the IP address of the service processor or NNP.
2. Save and close the new batch file.
Note: Make sure the JAVA2YOU.JAR file is correctly allocated in your
CONFIG.SYS file.
1. On your desktop, click the right mouse button.
2. Select New and Shortcut from the menu.