Terminal Disconnected for Remote Console is displayed, or
Remote Console Active Lamp is On
The Illustrations show a 3720 Model 2 or 12. The procedure is the same on a 3720
Model 1 or 11.
2.
Activate Remote CNSL
Disconnect Request
switch to invite the
remote console operator
to power off.
3.
When the Remote Console
Active lamp turns off,
power on the local
console.
4.
If the remote console operator does not log off, you can force him to log off by
doing steps 5, 6 and 7.
5.
Set to Panel.
o
0
6.
Activate Remote CNSL
Disconnect Request switch
to disconnect the remote
console.
7.
Set to Console.
Terminal Disconnected for Remote Console or Remote Console Active Lamp is On
2-3