Table of Contents
Advertisement
Figure 10. Example RAID and AWC controller configuration
Viewing link status information
You can view more detailed link status information in the Hardware Service Manager.
1. Select Start a service tool on the Use System Service Tools (SST) menu.
2. Select Hardware service manager on Start a Service Tool menu.
3. Select Logical hardware resources (buses, IOPs, controllers,...).
4. Select System bus resources.
5. Select the IBM Dual Storage IOA by placing a 9 (Resources associated with IOP) in front of the
desired adapter.
6. Enter 5 (Display detail) in front of Storage IOA for the desired adapter. The screen displayed will
look similar to the following example:
Chapter 2. SAS RAID controllers for IBM i
15
Advertisement
Table of Contents
