Updating Link Ipl Ports; Ipl Ports On 3745 (All Models) - IBM 3745 Series Connection And Integration Manual

o
Updating Link IPL Ports
0
o
o
o
The LKP function used in this procedure does not handle link IPL ports using
parallel channel adapters (CAs) nor serial channel adapters (ESCON*). For CAs,
use the CDF function (refer to the Advanced Operations Guide, SA33-0097). For
ESCONs, use the MOSS-E functions (refer to the Basic Operations Guide,
SA33-0177.
IPL Ports on 3745 (All Models)
Step 1
[g
0 0
(Enter)
Step
Step
Step
Step
2
3
4
If you have a two-CCU machine in twin-dual or twin backup mode, you
must select:
o
or
0
then
8
Select an option numbered 1 through 8 to access the information for
one of the eight possible IPL ports. (Line numbers for the defined link
IPL ports appear near the bottom of this screen.) Then:
I
Enter)
If you only want to display the IPL port information:
I
Enter]
If you do not want to define, modify, or delete IPL port information, go
to Step 7.
If you want to delete IPL port information, go to Step 6.
Otherwise, continue with the next step.
5 If you want to define or modify the IPL port information, enter the
four-digit line number. (The line numbers are shown on the plugging
sheets.)
Choose the clock type (E for external or D for direct-attached clock):
o
or
0
then
(Enter]
Enter options as needed, then:
8
Then go to Step 7.
Otherwise, continue with the next step.
Step 6
If you want to delete the Link IPL port information, use the space bar to
enter four blanks to erase the line number. Then:
Step
If you delete or not, continue with the next step.
7
§]
Repeat Steps 3 to 7 for each Link IPL port to be displayed, defined, or
deleted.
When you have finished, continue with the next step.
Chapter 5. Integration Procedures
5-17