Parallel I/O Mode; Rom Code Protect Function - Renesas R8C Series User Manual
16-bit single-chip microcomputer
Hide thumbs
Also See for R8C Series:
- User manual (51 pages) ,
- Hardware manual (257 pages) ,
- Hardware manual (197 pages)
Table of Contents
Advertisement
R8C/1A Group, R8C/1B Group
18.6
Parallel I/O Mode
Parallel I/O mode is used to input and output software commands, addresses, and data necessary to control (read,
program, and erase) the on-chip flash memory. Use a parallel programmer which supports this MCU. Contact the
manufacturer of the parallel programmer for more information, and refer to the user's manual of the parallel
programmer for details on how to use it.
ROM areas shown in Figures 18.1 and 18.2 can be rewritten in parallel I/O mode.
18.6.1
ROM Code Protect Function
The ROM code protect function disables the reading and rewriting of the flash memory. (Refer to the 18.3
Functions to Prevent Rewriting of Flash Memory.)
Rev.1.30
Dec 08, 2006
REJ09B0252-0130
Page 273 of 315
18. Flash Memory
Advertisement
Table of Contents
