21. Notes On On-Chip Debugger - Renesas R8C Series User Manual
16-bit single-chip microcomputer
Hide thumbs
Also See for R8C Series:
- User manual (51 pages) ,
- Hardware manual (257 pages) ,
- Hardware manual (257 pages)
Table of Contents
Advertisement
R8C/1A Group, R8C/1B Group
21. Notes on On-Chip Debugger
When using on-chip debugger to develop and debug programs for the R8C/1A Group and R8C/1B Group, take note of
the following.
(1)
Do not access the related UART1 registers.
(2)
Some of the user flash memory and RAM areas are used by the on-ship debugger. These areas cannot be
accessed by the user.
Refer to the on-chip debugger manual for which areas are used.
(3)
Do not set the address match interrupt (registers AIER, RMAD0, and RMAD1 and fixed vector tables) in a
user system.
(4)
Do not use the BRK instruction in a user system.
Connecting and using the on-chip debugger has some special restrictions. Refer to the on-chip debugger manual for
on-chip debugger details.
Rev.1.30
Dec 08, 2006
REJ09B0252-0130
Page 309 of 315
21. Notes on On-Chip Debugger
Advertisement
Table of Contents
