1. Installation Do not connect the E8 emulator hardware until the software support has been installed. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to the RSK directory from the CD root folder and double click on “setup.exe”. The software license agreement will be displayed.
Page 3
To learn more on how to user HEW, open the HEW manual installed on your computer (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > Manual Navigator). 13. Launch HEW from the Start Menu. (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > High-performance Embedded Workshop) 14.
Page 4
27. The first time the E8 is used the following dialog appears: Otherwise skip to step 31. 28. Click <OK>. 29. Select “Renesas E-Series USB Driver”. Select “USB Interface”. The channel number will vary. 30. Click <Close>. 31. Accept any dialogue warning that an older version of E8 firmware is necessary to work with the application.
You can add projects to the current workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the device and development process using Renesas Development Tools. The Hardware manual supplied with this RSK is current at the time of publication. Please check for any updates to the device manual from the Renesas website at: 7.