Advertisement
Quick Links
To our customers,
st
On April 1
, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Old Company Name in Catalogs and Other Documents
Renesas Electronics website:
http://www.renesas.com
st
April 1
, 2010
Renesas Electronics Corporation
Advertisement
Related Manuals for Renesas R8C/13
Summary of Contents for Renesas R8C/13
- Page 1 On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
- Page 2 Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
-
Page 3: Quick Start
Quick Start Renesas Starter Kit for R8C/13 LCD module Application Board Interface Reset switch E8 header LCD module connector E8 emulator Application Board Interface User LEDs Analog adjust User switches D007054_11_S01_V04... - Page 4 1. Installation Do not connect the E8 emulator hardware until the software support has been installed. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to the RSK directory from the CD root folder and double click on ‘setup.exe’. The installer will ask you which language is to be used, please choose the appropriate one.
- Page 5 18. In the “Welcome” dialog box: Verify “Create New Workspace” is selected. Click <OK>. 19. In the “New Project Workspace” dialog box: Set the “CPU Family” to “M16C”, and verify the “Tool chain” is set to “Renesas M16C Standard”. Select “RSKR8C13” from the left hand pane.
- Page 6 The first time the E8 is used a warning message box “Please choose driver” will be shown. Click <OK>. Otherwise skip to step 37. 34. The “Driver Details” dialog will be shown. Select “Renesas E-Series USB Driver”. 35. After a short delay while the hardware is interrogated, select “USB Interface”.
- Page 7 6. Renesas M16C Compiler The version of the compiler provided with this Renesas Starter Kit is fully functional but time limited. You have 60 days to evaluate the full product before the compiler will limit the code linker to 64k bytes. Full licensed M16C compiler versions are available from your Renesas supplier.