Table of Contents
Advertisement
Chapter 9
State codes on status and information screens
Red flag indicator
HN9000 Satellite Modem Installation Guide
64
1037576-0001 Revision G
information. If you do not see the pop-up window, it may be hidden by other windows; in this
case, minimize other open windows.
Count values such a count of errors or packets received may start at or revert to zero when they
reach a maximum number or if the modem is restarted.
A state code is a number that indicates the operational state of the satellite modem. State codes
are displayed with an explanation in words, as shown in the following example. On the System
Control Center status and information screens, state codes are shown next to selected parameters,
as shown in
Figure 46: Example of a state code
to an error condition.
Figure 46: Example of a state code
For a list and explanation of all state codes, see
On the status and information screens, a red flag next to a value indicates a problem related to
the parameter listed in the same row where the flagged value appears. The flagged value appears
in the right column; the parameter appears in the middle column. The value indicates the current
state of the parameter.
Figure 47: Red flag problem indicator
The red flag may help you identify and troubleshoot a problem. If you see a red flag, click the
parameter name. The pop-up window that appears may include troubleshooting information.
For detailed troubleshooting information concerning red flag indicators, see:
•
Red flags on System Status page
•
Red flags on Reception Information page
•
Red flags on Transmission Information page
In these three sections you can find the probable cause and possible solution for a red flag next
to a specific parameter.
on page 64, or next to a parameter that is related
Table 17: State codes
on page 67
on page 70
on page 72
System Control Center
on page 79.
Advertisement
Table of Contents
Troubleshooting
